CORRECT CRAFT Air Nautique Specifications download pdf (Page 42)

PROPELLER Here are a few tips for the installation of the propeller.

CAUTION: A propeller can be very sharp so be careful when you handle

it. It’s a good idea to wear a pair of protective gloves when handling any

propeller.

1. Before placing the propeller on the shaft, take a look at the keyway on the

shaft and in the propeller. Make sure the key slides freely in the shaft keyway

as well as the propeller keyway. You may need to file the flat sides of the key

and the keyway to remove burrs. Rotate the shaft until the keyway is “up”.

Place the key in the shaft keyway. Rotate the propeller so the keyway in the

propeller is aligned with the keyway on the shaft. (See illustration.) Once

aligned, push the propeller onto the shaft. You’ll hear a solid “thunk” as the

propeller is seated. The propeller will only slip on in one direction.

2. Put the castle nut on the shaft and wrench tighten.

5.2

Sport-Air2002.qxd 8/21/01 9:09 AM Page 5.2

PROPELLER Here are a few tips for the installation of the propeller.

CAUTION: A propeller can be very sharp so be careful when you handle

it. It’s a good idea to wear a pair of protective gloves when handling any

propeller.

1. Before placing the propeller on the shaft, take a look at the keyway on the

shaft and in the propeller. Make sure the key slides freely in the shaft keyway

as well as the propeller keyway. You may need to file the flat sides of the key

and the keyway to remove burrs. Rotate the shaft until the keyway is “up”.

Place the key in the shaft keyway. Rotate the propeller so the keyway in the

propeller is aligned with the keyway on the shaft. (See illustration.) Once

aligned, push the propeller onto the shaft. You’ll hear a solid “thunk” as the

propeller is seated. The propeller will only slip on in one direction.

2. Put the castle nut on the shaft and wrench tighten.

5.2

Sport-Air2002.qxd 8/21/01 9:09 AM Page 5.2

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 99 100

Comments to this Manuals

No comments