CORRECT CRAFT Air Nautique Specifications Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 100
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
5.11
TUNABLE RUDDER
The Tunable Rudder is designed to offer easy adjustment of steering. This system
utilizes a composite tuning foil which is located at the upper aft corner of the
rudder blade. To adjust the foil a Phillips head screwdriver will be needed.
Loosen the two machine screws located in the relief slots of the tuning foil.
Mfgd.
under license from National Products, Inc. U.S. Patent 5,746,147.
Adjusting Tuning Foil left or right
Loosening Tuning Foil (Z-trim)
If the boat is pulling left, rotate the foil to the left and tighten screws.
If boat is pulling to right, rotate the foil to the right and tighten screws.
Always remember that movement of the trailing edge of the foil to one
side will cause the steering to pull to the opposite side.
Note: After each adjustment, test run and adjust again if necessary.
Sport-Air2002.qxd 8/21/01 9:09 AM Page 5.11
5.11
TUNABLE RUDDER
The Tunable Rudder is designed to offer easy adjustment of steering. This system
utilizes a composite tuning foil which is located at the upper aft corner of the
rudder blade. To adjust the foil a Phillips head screwdriver will be needed.
Loosen the two machine screws located in the relief slots of the tuning foil.
Mfgd.
under license from National Products, Inc. U.S. Patent 5,746,147.
Adjusting Tuning Foil left or right
Loosening Tuning Foil (Z-trim)
If the boat is pulling left, rotate the foil to the left and tighten screws.
If boat is pulling to right, rotate the foil to the right and tighten screws.
Always remember that movement of the trailing edge of the foil to one
side will cause the steering to pull to the opposite side.
Note: After each adjustment, test run and adjust again if necessary.
Sport-Air2002.qxd 8/21/01 9:09 AM Page 5.11
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Comments to this Manuals

No comments