CORRECT CRAFT Air Nautique Specifications download pdf (Page 9)

100

Erasing the User Codes

Make sure the system indicator light is off. Enter the master embedded code

and press buttons one and three at the same time. This will erase the system

user codes.

The keyless ignition will now behave as if there are no codes in memory.

Pressing the start button will unlock the system and pressing the stop button

will lock it without entering a code. To program a primary user code, make

sure the system indicator light is off and press buttons one and four at the same

time. This puts the system in code programming mode. The system indicator

light will be flashing. Follow the last two steps above to complete

programming the primary user code.

Key Functions

All keys with the exception of the bilge blower, bilge pump, horn, and the code

keys operate in unlocked or run mode. The horn, up, down, and start buttons,

(when starting the engine), are momentary buttons. All others require a press

to turn on and another press to turn off.

Exceptions

Pressing the heater button will actuate the heater in the following sequence:

Heater off (low(medium(high(back to off)

Pressing the LCS fill or drain will toggle the power to the corresponding

function. Turning either the fill or the drain on will automatically turn the

other off.

The navigation light button always controls the anchor light and if the

navigation lights are on, the anchor light button will have no affect. If the

navigation lights are off, the anchor light button will turn only the anchor light

on and off. One special feature works when the anchor lights are on. If the

user desires to turn the navigation lights on, it is unnecessary to turn the anchor

lights off. Simply pressing the navigation light button will leave the anchor

light on and turn on the bow light.

1.5

Sport-Air2002.qxd 8/21/01 9:08 AM Page 1.5