CORRECT CRAFT Air Nautique Specifications download pdf (Page 76)

100

If you must run the engine with the boat out of the water, attach a water hose

to the pump inlet and run the engine slowly (650 - 700 RPM) in neutral to

circulate the water. DO NOT increase engine speed above 1,000 RPM or water

pump damage may occur. If running the engine with the boat in the water, run

the engine at 1,000 to 1,500 RPM. Watch the water temperature gauge to

prevent overheating.

ARNING: The maintenance instructions given in this manual are to

be performed with extreme caution. Improper or careless actions on the

part of the person performing maintenance on your boat or engine could

result in severe personal injury, property damage and or death. Before

performing any operating or maintenance procedure covered in this

manual, be certain to read the entire manual in be certain you fully

understand the procedure. Proceed only when you determine that you

may do so in complete safety

. Contact your Correct Craft/PCM dealer

for any maintenance service which you are unable to perform in

complete safety

PCM Python Engine Note: Caution: The PCM Python is a high-

performance engine and may use more oil per engine hour of operation than

other engines. Be sure to check the oil on a very regular basis, at least every

two or three hours of operation. Failure to remedy an engine with insufficient

oil

could cause severe engine damage.

8.18

FIRING ORDER

1-3-7-2-6-5-4-8

FORD BASED ENGINES

LEFT HAND ROTATION

FRONT

FIRING ORDER

1-8-4-3-6-5-7-2

GM BASED ENGINES

LEFT HAND ROTATION

FRONT

Cylinder Number Locations

Sport-Air2002.qxd 8/21/01 9:09 AM Page 8.18

If you must run the engine with the boat out of the water, attach a water hose

to the pump inlet and run the engine slowly (650 - 700 RPM) in neutral to

circulate the water. DO NOT increase engine speed above 1,000 RPM or water

pump damage may occur. If running the engine with the boat in the water, run

the engine at 1,000 to 1,500 RPM. Watch the water temperature gauge to

prevent overheating.

ARNING: The maintenance instructions given in this manual are to

be performed with extreme caution. Improper or careless actions on the

part of the person performing maintenance on your boat or engine could

result in severe personal injury, property damage and or death. Before

performing any operating or maintenance procedure covered in this

manual, be certain to read the entire manual in be certain you fully

understand the procedure. Proceed only when you determine that you

may do so in complete safety

. Contact your Correct Craft/PCM dealer

for any maintenance service which you are unable to perform in

complete safety

PCM Python Engine Note: Caution: The PCM Python is a high-

performance engine and may use more oil per engine hour of operation than

other engines. Be sure to check the oil on a very regular basis, at least every

two or three hours of operation. Failure to remedy an engine with insufficient

oil

could cause severe engine damage.

8.18

FIRING ORDER

1-3-7-2-6-5-4-8

FORD BASED ENGINES

LEFT HAND ROTATION

FRONT

FIRING ORDER

1-8-4-3-6-5-7-2

GM BASED ENGINES

LEFT HAND ROTATION

FRONT

Cylinder Number Locations

Sport-Air2002.qxd 8/21/01 9:09 AM Page 8.18

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 99 100

Comments to this Manuals

No comments

CORRECT CRAFT Air Nautique Specifications Page 76

Comments to this Manuals

Related products and manuals for Motor vehicle accessories & components CORRECT CRAFT Air Nautique